DH.WIF03155

Circulating air incubator, type WIF-155, 155 L, with digital fuzzy controller, timer: 99 hr/59 min., +5°C o.c. to 70°C

Listprice: 2,00 € valid until 2024-12-31

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
 

Features:

optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, accuracy of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
RS232C interface for monitoring and controlling (WireRemote) storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing
 

Safety mechanism:

overheat and over-current protection
sensor error detection and locking mode
 

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons
 

Incubator WIF, 2 PE-coated steel wire shelves, power cable, instruction manual

Features
Jog-Dial controller:

ergonomic design for easy and convenient usage
2-way Jog-Dial knob provides simple setting of required temperature and time
high quality illuminated LCD
„MAIN“ and „SUB“ button to access all menus
 

Temperature uniformity successfully tested by ASTM standards:All incubators and ovens are thoroughly tested, using 12 temperature sensors and the latest instruments to obtain validation, which corresponds to international standards.

Green product:All incubators and ovens achieve minimum power consumption by using heating elements consuming minimum power adjusted for the capacity and temperature of the chamber.

Forced-air: The incubators forced-air flow is established by a three sided heating element in combination with a very effective fan placed in an air-flow room for best temperature uniformity in the whole chamber.

Width (inner)

550 mm
Length (inner)

475 mm
Height (inner)

600 mm
Width (Outer)

700 mm
Length (outer)

760 mm
Height (outer)

906 mm
Heating time

17 min. to 37°C, 30 min. to 50°C
Shelves

2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)
Heating power

400 W
Capacity

155 l
Hole diameter

Inner Ø35 mm
Holes

1 ventilation hole with stainless steel cap
Power consumption

438.1 W
Temperature variation

±0.4°C at 37°C, ±0.7°C at 50°C
Temperature control resolution

Control ±0.1°C
Temperature range

Room temperature +5°C - 70°C
Temperature fluctuation

±0.2°C at 37°C, ±0.3°C at 50°C
Packing size

731 x 810 x 1018 mm
Recovery time

3 min. to 37°C, 4 min. to 50°C
Sensor

Temperature sensor PT100