DH.WIG03032

Incubator, type TIG-32, 32 L, with digital fuzzy controller, timer: 99 hr/59 min, +5°C o.c. to 70°C

Listprice: 1.296,00 € valid until 2024-12-31

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
 

Features:

gravity-air flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, fluctuation of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
controller SW can be upgraded through USB port
RS232C interface for monitoring and controlling (WireRemote)
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing
 

Safety mechanism:

overheat and over-current protection
sensor error detection and locking mode
 

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons
 

Incubator WIG, 2 PE-coated steel wire shelves, power cable, instruction manual

Features
Jog-Dial controller:

ergonomic design for easy and convenient usage
2-way Jog-Dial knob provides simple setting of required temperature and time
high quality illuminated LCD
„MAIN“ and „SUB“ button to access all menus
 

Temperature uniformity successfully tested by ASTM standards:All incubators and ovens are thoroughly tested, using 12 temperature sensors and the latest instruments to obtain validation, which corresponds to international standards.

Green product:All incubators and ovens achieve minimum power consumption by using heating elements consuming minimum power adjusted for the capacity and temperature of the chamber.

Gravity-air:The incubators gravity-air flow is established by creating radiant and conductive heat on three sides of the chamber (bottom, left and right side).

Width (inner)

312 mm
Length (inner)

290 mm
Height (inner)

360 mm
Width (Outer)

458 mm
Length (outer)

477 mm
Height (outer)

624 mm
Heating time

25 min. to 37°C, 40 min. to 50°C
Shelves

2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)
Heating power

150 W
Capacity

32 l
Hole diameter

Inner Ø35 mm
Holes

1 ventilation hole with stainless steel cap
Power consumption

159 W
Temperature variation

±0.6°C at 37°C, ±1.0°C at 50°C
Temperature control resolution

Control ±0.1°C
Temperature range

Room temperature +5°C - 70°C
Temperature fluctuation

±0.2°C at 37°C, ±0.3°C at 50°C
Packing size

568 x 592 x 698 mm
Recovery time

8 min. to 37°C, 12 min. to 50°C
Sensor

Temperature sensor PT100